News

The door and window market continues to develop and improve. More and more consumers are paying attention not only to product price, quality, after-sales service, but also to the brand's popularity and reputation. If the enterprise still stays in the business philosophy of the past seller market, it will definitely be in a disadvantageous position in the market competition, and even be ruthlessly eliminated by the market, the door and window industry enters the era of brand marketing. Improve brand concept and compete in high-end market China has become the leader in the global door and window consumer market. Many domestic door and window brands have achieved or exceeded the performance of foreign brands. However, foreign door and window brands have used the strong financial strength and high brand awareness to almost monopolize China's high-end door and window market. In addition to historical reasons, the lack of brand awareness of domestic companies is an important reason for this situation. Many corporate executives said that "low-end price, high-end quality" is their current business philosophy. Some door and window companies make full use of promotional methods to attract consumers' desire to buy. As a result, starting from the second quarter of this year, the door and window industry hit a price war, showing a growing trend, and even a rare low price of 499 yuan. This price is obviously lower than the manufacturing cost, but the brand is not only equal to the sales volume. Some of the misunderstandings in the door and window industry are: equating companies with brands. In fact, the product price price type card] is a spiritual property that can be independent of the factory. It can belong to you or belong to others. There are also many companies who mistakenly believe that with good products, big factories have big brands, put most resources into specific things, and are not willing to invest in brand marketing. Accurate positioning and precise marketing Brand is an effective tool for enterprise competition, and also a tool and carrier for realizing enterprise value. It is not a dispensable but a necessary choice. Positioning is the primary issue of brand operation and a strategic issue for the future development of the company. The facts show that companies that have never been sized, and there is no brand that is all-encompassing. In the era of information flooding and product proliferation, only brands with accurate positioning can be recognized and selected by consumers. By studying international brands and referring to the current market structure, there will be several trends in the development of China's door and window industry in the future: First, there will be a few [comprehensive door and window brands", and second, there will be [professional brands". ", the third is the emergence of "personalized door and window brand." Jinan Coton Glass Technology Co., Ltd. Specializing in hollow energy-saving glass, consulting Whatsapp:008618678872022, welcome to inquire!

What is a tempered glass door? The tempered glass door is a glass door made of tempered glass. The door made of prestressed glass improves the strength and load carrying capacity of the glass by chemical and physical methods, and enhances the wind resistance and heat resistance of the glass itself. Sex, impact, etc. Modern tempered glass doors are beautiful in appearance and diverse in variety, and are the pursuit of individuality and fashion after the 80s. Walking to the street, glass doors can be seen everywhere, and its decorative effect is indeed better than other types of doors; tempered glass doors also have a glass transparent effect, for the home, there is a good decorative effect, for commercial shops , also has a good product display effect. The disadvantage of the larger glass door is that it is fragile. In order to solve the problem of fragility, people have invented the technology of tempered glass and tempered glass, and applied it to the glass door. After tempering, the strength of the glass is increased, but there will be a self-detonation rate of three thousandths. The annual output of glass doors in China is extremely large, and the number behind the three thousandths is too large. On the other hand, the degree of flatness after tempering Poor will affect the aesthetics of the glass process, and high-end home improvement users will definitely care about this, so the tempered glass door is a kind of risk for the manufacturer is a kind of depression for the user. The combination of tempering and strengthening is safer and stronger. However, due to the self-explosion rate of tempered glass door glass, it is still not durable. Moreover, the popular 3D ultra-white and mirror process in recent years cannot be tempered before or after the process is completed. Processing, this is currently a major obstacle to the development of glass doors. Tempered glass door installation (1) Line positioning. Dash the upper and lower metal crosspieces of the glass door leaf, and fix the pin hole plate of the revolving pin and the rotating shaft connecting plate of the floor spring by the wire. The specific operation can be in accordance with the installation instructions of the floor spring product. (2) Cutting the glass. The mounting dimensions of the glass shall be measured from the bottom of the position at the top and the top of the middle, and the smaller size shall be the cut size of the width of the glass. If the dimensions measured in the upper, middle and lower are the same, the cutting of the glass width should be 3mm~5mm smaller than the measured size, and the height of the glass plate should be cut, which should be less than the measured size of 3mm~5mm. After the glass plate is cut, the four corners should be chamfered, and the chamfer width is 2mm. If you chamfer yourself at the scene, you should hold the fine grinding wheel block for slow grinding operation to prevent collapse and collapse. (3) The height dimension of the movable fan should be noted when cutting the glass plate, including the installation site where the upper and lower rails are inserted. In general, the height of the glass should be less than about 5 mm of the measurement size to facilitate positioning adjustment during installation. (4) Height base. The wooden bottom of the stainless steel (or copper) finish can be fixed to the ground by wooden wedges and nails, and then the stainless steel veneer is stuck on the wooden side with the multifunctional glue. If an aluminum alloy square tube is used, it can be fixed to the frame with an aluminum angle, or fixed with a wood screw on the wooden wedge embedded in the ground.

Because of the high impact strength and safety of laminated glass, laminated glass is suitable for doors, windows, ceilings, floors and partitions of buildings; skylights for industrial plants; shop windows; kindergartens, schools, stadiums, private homes, Villas, banks, jewelry stores, post offices, etc., store valuables or doors and windows of glass fragile buildings. Laminated glass is made of a tough polyvinyl butyral (PVB) interlayer film between glass, which is processed by high temperature and high pressure. Laminated glass made of transparent film has the same appearance and installation method as ordinary glass, and is durable. Although ordinary laminated glass does not increase the mechanical strength of the glass, it has the following advantages, making it the recognized and safest glass product. It can be widely used in building doors and windows, curtain walls, daylight sheds, skylights, ceilings, overhead floors, large-area glass walls, indoor glass partitions, glass furniture, shop windows, counters, aquariums and other places where glass is used. Laminated glass has safety, security, hurricane and seismic characteristics, bulletproof, riot proof, noise reduction, solar control, UV protection, and water pressure resistance. What are the requirements for laminated glass in the construction industry? 1. Compared with other glass, it has the performance of shockproof, anti-theft, bulletproof and explosion-proof. 2. High safety, because the film of the middle layer is tough and has strong adhesion, it is not easy to be penetrated after being damaged by impact, the pieces will not fall off, and it is tightly bonded with the film. 3. The interlayer film can block 99% of ultraviolet rays and delay the fading of indoor furniture curtains. 4. Energy saving. The interlayer film can reduce the solar radiation, prevent the loss of the energy spring, save the electricity consumption of the air conditioner, and the intermediate film can buffer the sound wave vibration product of the sound, thereby achieving the sound insulation effect. 5. Increase the aesthetics of the building. 6. The interlayer film can be available in a variety of colors for the designer to easily coordinate with the exterior wall and the surrounding environment. 7. Building doors and windows anti-theft, bulletproof, explosion-proof lighting shed, glass roof bank, car, decoration and other underwater building laminated glass. The laminated glass itself has strong bottom layer, strong adhesion, acid and alkali resistance, quenching and rapid heat, no radiation and a safety net at the bottom, which not only increases the safety of the product, but also breaks through the drawbacks that the tempered glass can no longer be cut. Construction is more convenient.

The insulating glass is a glass deep-processed product in which two or more pieces of flat glass are separated by a partition frame and sealed with a sealant to form a dry gas space between the glass layers. It should be noted that the edge of the insulating glass is tightly sealed with a sealant. The inner cavity of the insulating glass is filled with dry air or an inert gas. The part of the gas is sealed in the cavity for a long time and cannot convect with the outside air. Therefore, The heat on both sides of the insulating glass does not carry away heat due to the convection of the gas between the glass. On the other hand, air is a poor conductor of heat, and the two layers of glass separated by a sealing gas have little heat conduction with each other, thereby providing good heat insulation. In addition, when a large temperature difference occurs on both sides of the insulating glass, since one glass only feels the temperature on one side, the two surfaces of the single glass do not have a large temperature difference. Therefore, when the temperature difference between the inside and the outside of the insulating glass is not particularly large (≥100 ° C), no frosting or dew condensation occurs. In addition, it should be noted that the insulating glass is not vacuum glass, and the pressure of the gas in the hollow glass cavity is basically the same as the outside, otherwise the glass is easily broken. From the above explanation, it can be known that the insulating glass and the ordinary double glazing are substantially different. The most essential difference between the two is that the former is sealed and the latter is not sealed. It is precisely because of the unsealing of the double-layer glass that dust and water vapor easily enter the glass cavity, the water vapor is cold and frosted, and the condensation on the inner surface of the glass can never be removed by heat condensation. The glass is blurred and filthy. Of course, double-layer glass can also play a certain role in sound insulation and heat insulation to a certain extent, but the performance is far from the hollow glass. The hollow glass construction generally refers to a sealed structure of an insulating glass. There are two main sealing structures for insulating glass: single-channel sealing and double-channel sealing. The single-pass sealing structure means that only one glue is used for the hollow glass structure, and silicone rubber, polysulfide rubber, polyurethane, hot melt butyl rubber or comfort rubber strip can be selected. The double-pass seal structure refers to the two-layer glue of the hollow glass structure, usually using polyisobutylene glue as the first seal and a structural glue such as polysulfide or silicone glue as the second seal. In general, in the double-pass sealing system, the glue used for the first seal has high water vapor transmission rate but poor structural properties, while the second sealant has high structural performance and poor water vapor transmission resistance.